|
|
Industrial Burners
We supply both Imported & Indian Burners of reputed make as per customers’ requirement. We have supplied all kinds of Burners of different models & capacities to various reputed clients.
Imported Burners
1. TERMO ISI , Turkey
2. OERTLI INDUFLAME , Switzerland
We are Authorised Dealers of TERMO ISI, Turkey for the following –
I. MONOBLOC SERIES (Pressure Automised Burners)
Oil & Gas Burners
i) Light Oil Burners (5 - 1025 kg / hr)
ii) Heavy Oil Burners (5 - 1025 kg / hr)
iii) Gas Burners (23 - 11000 KW)
iv) Dual Fuel Burner (96 - 6250 Kg / hr) - They can be operated on Oil / Gas.
Specialized Burners
i) Gas Process Burners (High temperature applications)
ii) Air Heat Gazoram Burners (Drying Burners)
iii) Duct Burners
iv) Process Burners for Brick Industry
II. DUOBLOC SERIES (Pressure Automised Burners)
i) Light Oil Burners
ii) Heavy Oil Burners - See catalogue of Fuel Heating & Pumping Unit (FPI)
iii) Gas Burners
iv) Oil cum Gas Burners
Steam / Air Automised Burners
i) Air Register Burners Low NOx Burners)
Quality Standards
Our Imported Burners are produced as per DIN 4787, 4788 and TS–EN standards. Moreover, they confirm to the following standards with respect to Product Quality, Safety etc.
• BVQi ( ISO 9001 – 2000 )
• DVGW
• RUS – I
• RUS - II
• TSE-2 (Turk Standards)
• VDE-2
|
View Enquiry Basket
 |
Heavy Oil Burner |
 |
|
 | The heavy oil burners are developed after research and are designed with special air intake system so the burners are working with low noise level, you do not hear anything in the boiler room.
Preheater
In order to have best combustion electrical preheather heates the heavy oil up to I35°C.
Pump
In order to Atomise the oil, It pressurize the oil up to 18-25 bar. It's controlled by coupling that is connected to the fan motor.
Control Pannel
You can easily detect the trouble by installed indication lamps on the control box |
|
|
 |
Add to Enquiry Basket |  |
|
Air Register Burner |
|
|
In ECONOX burners there are parallel air channels. Through these air channels, high temperatures of the flame in the combustion
chamber, can be prevented. In this way, the measured chimney gas particular emision rates, specially NOx rates can be reduced to a min level.
ECONOX burners are economic and nature friendly. Not burned gases which appear during the first working can be burned again with the seconder air channel. In this way, fuel saving and high productivity can be provided. |
|
|
|
|
Add to Enquiry Basket | |
|
Oil Cum Gas Burner |
|
|
| System Definition: Main scope of the sysytem is to optimize the combustion for maximum combustion efficiency and minimum emmission values. The system which is based on micro-processor logic can be easily programmed according to the application types via its wide-range parameter selections (all combustion scenario). LAMTEC Combustion Management System controls and monitors
the burners using its CO/O2 sensors with the closed-control logic in order to get the best ratio (air/fuel) for combustion optimization.
Working Principal: Using O2 and/or CO sensors installed on chimney, oxygen/Carbonmonoxyde values are measured instantly and transferred to main processor unit. In the meantime load signal on the boiler is transferred to main-processor unit. These values are compared with the values recorded in its Capacity-Oxygen Curve and according to the comparison results, positions of servo-motors and drivers are controlled and monitored continously for each capacity point. The fuel actuators, combustion air damper/flap and driver with F/C follow this optimisation curve independent from all fluctuations on the seasonal air conditions (weather temperature , pressure, humidity, dust..) in order to get the best air/fuel ratio. |
|
|
|
Add to Enquiry Basket | |
|
|
Showcase
